Lighting Services
Lighting Installation in
Lighting Installation in
Murfreesboro, TN
Transform your home or business with professional lighting installation. From recessed LED lighting to outdoor landscape and security lighting — we light up Murfreesboro.
Indoor & Outdoor Lighting Installation in Murfreesboro
The right lighting transforms a space — and professionally installed lighting is safer, more energy-efficient, and more beautiful than DIY. Murfreesboro Pro Electric handles all types of residential and commercial lighting installations throughout Murfreesboro and Rutherford County. Whether you're updating a 1990s home with dated can lights, adding landscape lighting to boost curb appeal, or designing an energy-efficient LED system for your office, we handle the design, wiring, and installation from start to finish.
Indoor Lighting Services
- Recessed (can) lighting installation — including rooms with no existing fixture
- LED lighting upgrades and retrofits for existing fixtures
- Chandelier and pendant light installation and replacement
- Under-cabinet LED lighting (hardwired)
- Track lighting installation for kitchens and galleries
- Dimmer switch installation and LED-compatible dimmer upgrades
- Smart lighting integration (Lutron Caseta, Leviton Decora, Kasa)
- Bathroom vanity and mirror lighting
- Kitchen island and task lighting
- Accent and cove lighting
- Hallway and staircase lighting
- Closet and utility lighting
Outdoor Lighting Services
- Landscape and pathway lighting (low-voltage LED systems)
- Exterior security lighting and floodlights
- Motion-sensor and photocell-controlled lighting
- Deck, patio, and pergola lighting
- Garage, carport, and porte cochere lighting
- String light wiring and outdoor receptacle circuits
- Driveway, gate, and entrance lighting
- Holiday lighting circuits and outlet placement
- Commercial parking lot and building lighting
- Pool and spa area lighting with GFCI protection
Energy-Efficient LED Lighting Upgrades
Switching to LED lighting throughout your Murfreesboro home or business can reduce your lighting energy costs by up to 75%. We can audit your current lighting, recommend LED equivalents, and handle full installation — typically recouping the cost within 1–2 years through energy savings on your TVA or Murfreesboro Electric Department bill.
LED technology has advanced dramatically — today's LED bulbs and fixtures produce warm, beautiful light that rivals incandescent while consuming a fraction of the energy and lasting 25,000+ hours. We help you choose the right color temperature (2700K–4000K) and fixture style for each space, ensuring results that look premium, not institutional.
For commercial clients, LED upgrades often qualify for TVA energy efficiency rebates — we can advise you on which upgrades qualify and help document the installation for your rebate application.
Types of Lighting We Install
- Recessed Lighting: Sleek, modern can lights installed flush with the ceiling for a clean, open look. We size the fixture (4" for accent lighting, 6" for general illumination), cut the opening, and run the wiring — including in rooms with no existing light fixture. Modern airtight IC-rated LED downlights eliminate energy loss through the ceiling.
- Chandelier & Pendant Lights: Statement fixtures for dining rooms, entryways, and kitchen islands. Proper support blocking and wiring are critical — heavy chandeliers (50+ lbs) require a fan-rated box and often additional bracing. Our electricians ensure every installation is safe, properly supported, and code-compliant.
- Under-Cabinet Lighting: Hardwired LED strip or puck lighting beneath kitchen cabinets provides task lighting and a premium look. Far cleaner and more reliable than plug-in options, and eliminates unsightly power cords. We connect directly to a switched circuit so controls are seamless.
- Smart Lighting Systems: Full integration with Lutron Caseta, Leviton Decora Smart, or Kasa smart switches. Control every light from your phone, via Alexa/Google Home, or on a programmed schedule. Includes multi-location dimming, scene control, and integration with motion sensors and occupancy detectors.
- Landscape & Pathway Lighting: Low-voltage LED systems for driveways, garden paths, and tree spotlights. We use 12V systems with weatherproof fixtures and direct-burial cable — far more reliable than solar options. Adds curb appeal and nighttime security for Murfreesboro homes.
- Security & Flood Lighting: Motion-activated LED floodlights for perimeter security. We mount, wire, and aim fixtures for optimal coverage. We can also integrate with your Ring, Nest, or other smart security system for recorded motion-triggered lighting.
- Commercial & Retail Lighting: LED troffer replacements for offices, track lighting for retail displays, exterior signage lighting, and parking lot LED upgrades. Code-compliant commercial installations with proper circuit sizing.
Understanding Lighting Design Basics
Professional lighting design makes a significant difference in how a space feels and functions. Here are the principles we apply to every project:
Layered Lighting
Every well-lit room combines ambient (overall illumination), task (focused work light), and accent (decorative/art) lighting. We design circuits with separate controls for each layer.
Color Temperature
Warm (2700K) for bedrooms and living areas. Neutral (3000K) for kitchens. Cool (4000K) for bathrooms and offices. Daylight (5000K+) for garages and workshops.
CRI (Color Rendering Index)
CRI measures how accurately a light source renders colors compared to natural sunlight. We recommend CRI 90+ for kitchens, bathrooms, and retail spaces where color accuracy matters.
Dimming Compatibility
Not all LED fixtures are dimmable, and many require specific dimmer models to avoid flickering or buzzing. We specify and install the right Lutron or Leviton dimmer for every LED installation.
Common Lighting Projects in Murfreesboro Homes
Here are the most popular lighting upgrades we complete for Murfreesboro homeowners:
Recessed lighting — room with no existing fixtureMost popular
Whole-home LED conversionUp to 75% energy savings
Kitchen recessed + under-cabinet lightingDramatic transformation
Smart lighting conversion (Lutron Caseta)No neutral wire required
Landscape and pathway lightingCurb appeal + security
Our Lighting Installation Process
1
Free Estimate & Design Consultation
We assess your current lighting, discuss your goals and aesthetic preferences, recommend specific fixtures and placement for the best results, and provide a detailed written estimate — at no charge.
2
Circuit Capacity Check
We verify your existing circuits can handle new fixtures, or we run a new dedicated lighting circuit as needed. We check that your panel has available capacity before adding new loads.
3
Professional Installation
Fixtures are installed cleanly and correctly. We patch any drywall cuts, clean up all debris and packaging, and leave your space cleaner than we found it. All wiring is properly secured and code-compliant.
4
Testing & Walkthrough
Every fixture is tested at full brightness and on dimmer. Smart controls are programmed and connected to your home network. We walk you through all controls before we leave — and we're available for questions after the job.
Lighting FAQ
Can I add recessed lighting to a room with no existing light fixture?
Yes — this is one of our most common requests in Murfreesboro homes. We run new wiring from your electrical panel or an existing circuit to the ceiling location, install an appropriate junction box, and cut the openings for recessed cans. The work is typically completed in one visit and can dramatically transform a room that previously relied on floor lamps. We minimize drywall cutting by routing through the attic where possible.
Do my light switches need to be replaced for LED bulbs?
Not always — but if you have dimmer switches, old dimmer models may not be compatible with LED bulbs and will cause flickering, buzzing, or reduced dimming range. We recommend replacing old dimmers with modern LED-compatible dimmers (such as Lutron Skylark or Caseta) when upgrading to LED fixtures or bulbs. Standard (non-dimming) switches work fine with LED bulbs as-is.
How many recessed lights do I need per room?
A general rule of thumb is one 4-inch recessed light per 4 square feet of ceiling area, or one 6-inch light per 6 square feet — but the ideal count depends on ceiling height, room use, fixture lumen output, and desired ambience. Kitchen and workspace lighting needs more intensity than a bedroom or dining room. We calculate the right number for your specific room during the free estimate — including which fixtures to use for the cleanest look.
What's the difference between warm white and cool white lighting?
Color temperature is measured in Kelvin (K). Warm white (2700K–3000K) produces a cozy, incandescent-like glow — ideal for bedrooms, living rooms, and dining areas. Cool white (3500K–4100K) is crisp and energizing — great for kitchens, bathrooms, and home offices. Daylight (5000K–6500K) mimics natural sunlight and is used in garages, workshops, and commercial spaces. We help you choose the right temperature for every room and ensure all fixtures in a space match for a cohesive look.
Can smart lighting work without a neutral wire at my switches?
Yes — Lutron Caseta smart switches are specifically designed to work without a neutral wire, making them the ideal smart lighting solution for older Murfreesboro homes where neutral wires aren't present at switch locations. Caseta dimmers work with most LED fixtures and integrate with Alexa, Google Home, and Apple HomeKit. We install and configure the entire Caseta system, including the Lutron Smart Bridge for remote control.
What permits are required for lighting installation in Murfreesboro?
Simple fixture replacements (swapping one fixture for another on an existing circuit) typically don't require a permit. However, new circuit installations, adding recessed lighting in a room with no existing light, and any work involving new wiring runs may require a permit in Murfreesboro or Rutherford County. We'll advise you whether a permit is needed for your specific project and handle the application if required.
DIY Lighting Installation vs. Hiring a Professional
Some lighting work is within reach of a careful homeowner. Most, however, involves live wiring inside walls and ceilings — and carries real shock and fire risk when done incorrectly. Here's a clear breakdown:
✔ Safe for Homeowners
- Replacing a bulb in an existing fixture
- Swapping a plug-in floor or table lamp
- Pressing TEST/RESET on a GFCI protecting exterior outlets
- Pairing a smart bulb with an existing smart speaker
✘ Requires a Licensed Electrician
- Installing or replacing any hardwired fixture
- Adding recessed lighting (requires wiring)
- Replacing or adding any dimmer switch
- Installing under-cabinet hardwired LED
- Running conduit for outdoor lighting
- Adding new circuits for lighting
Hardwired lighting work — even something that seems as simple as replacing a ceiling fan — involves working with 120V wiring in junction boxes. Wiring errors cause fires and electrocutions. Improper fan support can cause fixtures to fall. In Tennessee, hardwired electrical work requires a licensed contractor. Our licensed electricians complete most lighting jobs in a single visit, leaving no exposed wires, no drywall damage, and no fire hazard.
Health & Safety Impacts of Poor Lighting
Lighting quality isn't purely aesthetic — it directly affects health, safety, and wellbeing in your Murfreesboro home:
⚡ Shock & Fire Risk from Overloaded Lighting Circuits
Using LED bulbs with wattage-rating mismatches, connecting too many fixtures to a single circuit, or using non-IC-rated recessed lights in insulated ceilings creates fire risk. Non-IC-rated (non-insulation contact) recessed lights must maintain a 3-inch clearance from insulation — if covered, they overheat. We install airtight IC-rated LED fixtures that are safe in all ceiling types.
🌙 Sleep Disruption from Poor Color Temperature Selection
Blue-rich light at 5000K–6500K suppresses melatonin production — significantly disrupting sleep quality when used in bedrooms, living rooms, or other spaces occupied during evening hours. Numerous studies link evening blue light exposure to insomnia, daytime fatigue, and mood disruption. Our lighting design selects warm 2700K–3000K sources for evening-use spaces, reducing blue light impact on your family's sleep cycle.
👀 Eye Strain from Improper Task Lighting
Insufficient lighting at work surfaces (kitchens, home offices, reading areas) forces the eyes to strain continuously — contributing to headaches, fatigue, and reduced productivity. The American Optometric Association recommends a minimum of 50 foot-candles at kitchen work surfaces. Under-cabinet and properly-placed task lighting provides the right illuminance exactly where needed without creating glare from overhead sources.
🚶 Trip & Fall Hazards from Insufficient Pathway Lighting
Poorly lit stairways, hallways, and outdoor pathways are a leading cause of falls — particularly for older adults and children. The National Safety Council identifies inadequate lighting as a contributing factor in thousands of serious residential fall injuries annually. Proper stair lighting, nightlights on motion-sensor switches, and low-voltage pathway lighting at entrances and walkways significantly reduce this risk.
💡 Transform Your Home with Professional Lighting
Whether you want to upgrade to energy-efficient LEDs, add recessed lighting to a dark room, create a stunning kitchen with layered lighting, or install a comprehensive outdoor landscape lighting system, Murfreesboro Pro Electric delivers results that look professionally designed — because they are. Call (610) 735-6713 for a free lighting estimate throughout Murfreesboro and Rutherford County.